The Compact Series stands out because of its compact design. Due to is reduced weight it can be used for smaller machines with limited tool exchange weight. This aggregate can only be used for boring, as well as light milling and sawing operations.
This aggregate also, is available as a standard product with 2 outlet connections fixed at 90 °. The unit can be built with any combination of fixed angles other than 90 ° for a surcharge. As this unit is only available with a maximum input speed of 10,000 RPM and a gear ratio of 1 : 1.5, it to, is ideally suited for horizontal routing applications, horizontal drilling/boring applications and sawing applications. Output connections options are available for these 3 applications. These outlet connections can be mixed and matched as desired. The price of this unit is not affected by the choice and configuration of these output connections. As the result of our modular design system all aggregates are able to be manually rotated from 0 to 360 (resp. 4 times from 0 to 90) on the horizontal plane. Compact - Grease Lubrication Maximum RPM Input: 8.750 1/min Maximum RPM Output: 12.000 1/min Maximum Torque: 10 Nm Maximum Tempe Tool Outlet Options: - ER25 Nut and Collet - 10 mm Weldon Drill ConnectionAggregate can be Rotated 360°Maximum Acceleration: 120 1/s²et